Célia Masternak, Simon Meunier, Vincent Reinbold, Dirk Saelens, Claude Marchand, Yann Leroy. Potential of air-source heat pumps to reduce environmental impacts in 18 European countries, 2024-04. (https://hal.science/hal-04549232v1)
Rémi Jardot, Guillaume Krebs, Anas Lahlou, Francis Roy, Claude Marchand. Calculation of Losses in a Motor Fed by a Conventional Inverter and a Battery Distributed Inverter, 2023. (https://hal.science/hal-04434476v1)
Qi Jiang, Olivier Béthoux, Florence Ossart, Éric Berthelot, Claude Marchand. A comparison of real-time energy management strategies of FC/SC hybrid power source: Statistical analysis using random cycles, 2021-09-13. (https://hal.science/hal-03835244v1)
Simon Meunier, Loic Queval, Arouna Darga, Philippe Dessante, Claude Marchand, Matthias Heinrich, Judith Cherni, Elvire de La Fresnaye, Vido Lionel, Bernard Multon, P.K. Kitanidis. Sensitivity Analysis of Photovoltaic Pumping Systems for Domestic Water Supply, 2020-12. (https://centralesupelec.hal.science/hal-03313714v1)
T. Vezin, Simon Meunier, Loic Queval, J.A. A Cherni, L. Vido, Arouna Darga, Philippe Dessante, P.K. K Kitanidis, Claude Marchand. Borehole water level model for photovoltaic water pumping systems, 2020-01. (https://hal.science/hal-03582268v1)
Christine Abdel Nour, Anne Migan-Dubois, Jordi Badosa, Vincent Bourdin, Claude Marchand, Tilda Karkour Akiki. Geometrical optimization for a photovoltaic installation equipped with flat reflectors based on plane of array estimations, 2020. (https://hal.science/hal-02550119v1)
Duy-Minh Nguyen, Imen Bahri, Guillaume Krebs, Éric Berthelot, Claude Marchand, Iliya Ralev, Bernhard Burkhart, Rik W. de Doncker. Efficiency Improvement by the Intermittent Control for Switched Reluctance Machine in Automotive Application, 2019-07. (https://centralesupelec.hal.science/hal-02505253v1)
Simon Meunier, Matthias Heinrich, Loïc Quéval, Judith Cherni, Lionel Vido, Arouna Darga, Philippe Dessante, Bernard Multon, Peter Kitanidis, Claude Marchand. A validated model of a photovoltaic water pumping system for off-grid rural communities, 2019-05. (https://hal.science/hal-02117584v1)
Hongqin Xie, Guillaume Krebs, Maya Hage-Hassan, Man Zhang, Claude Marchand, Zhuoxiang Ren. A New Reluctance Network-Based Method With Complementary Distributed Magnetomotive Forces, 2019-04-25. (https://centralesupelec.hal.science/hal-02505073v1)
Duy-Minh Nguyen, Imen Bahri, Guillaume Krebs, Éric Berthelot, Claude Marchand. VIBRATION STUDY OF THE INTERMITTENT CONTROL FOR A SWITCHED RELUCTANCE MACHINE, 2019-04. (https://centralesupelec.hal.science/hal-02505263v1)
Moustafa Al Eit, Frédéric Bouillault, Claude Marchand, Guillaume Krebs. Model‐order nonlinear subspace reduction of electric machines by means of POD and DEI methods for copper losses calculation, 2018-04. (https://centralesupelec.hal.science/hal-01632678v1)
Qi Jiang, Florence Ossart, Claude Marchand. Comparative Study of Real-Time HEV Energy Management Strategies, 2017-12. (https://hal.science/hal-01693635v1)
M'Hamed Belhadi, Guillaume Krebs, Claude Marchand, Hala Hannoun, Xavier Mininger. Evaluation of axial SRM for electric vehicle application, 2017-07. (https://hal.science/hal-01677604v1)
Moustafa Al Eit, Patrick Dular, Frédéric Bouillault, Claude Marchand, Guillaume Krebs. Perturbation Finite Element Method for Efficient Copper Losses Calculation in Switched Reluctance Machines, 2017-06-01. (https://centralesupelec.hal.science/hal-01531370v1)
M'Hamed Belhadi, Guillaume Krebs, Claude Marchand, Hala Hannoun, Xavier Mininger. Geometrical optimization of SRM on operating mode for automotive application, 2017-01-03. (https://hal.science/hal-01677601v1)
Abla Dahia, Frédéric Dubas, M'Hamed Belhadi, Guillaume Krebs, Laurent Daniel, Claude Marchand. Couplage Magnéto-Mécanique pour le Dimensionnement de Machines Électriques, 2017. (https://hal.science/hal-03292415v1)
Moustafa Al Eit, Frédéric Bouillault, Laurent Santandrea, Claude Marchand, Guillaume Krebs. Calculation of Copper Losses in Case of Litz and Twisted Wires. 2D Modeling and Application for Switched Reluctance Machine, 2016-06-01. (https://centralesupelec.hal.science/hal-01531366v1)
Moustafa Al Eit, Frédéric Bouillault, Claude Marchand, Guillaume Krebs. 2D Reduced Model for eddy currents calculation in Litz Wire and Its Application for Switched Reluctance Machine, 2016-03. (https://centralesupelec.hal.science/hal-01249937v1)
M'Hamed Belhadi, Guillaume Krebs, Claude Marchand, Hala Hannoun, Xavier Mininger. Switched reluctance motor with magnetic slot wedges for automotive traction application, 2015-12. (https://centralesupelec.hal.science/hal-01246996v1)
Mahraz Bendali, Cherif Larouci, Toufik Azib, Claude Marchand, Gérard Coquery. Design methodology of an interleaved buck converter for onboard automotive application, multi-objective optimisation under multi-physic constraints, 2015-06-01. (https://centralesupelec.hal.science/hal-02394031v1)
Sidath Diao, Demba Diallo, Zaatar Makni, Claude Marchand, Jean-Francois Bisson. A Differential Algebraic Estimator for Sensorless Permanent-Magnet Synchronous Machine Drive, 2015-03. (https://hal.science/hal-01099335v1)
Sidath Diao, Demba Diallo, Claude Marchand. An observer-based for Sensors (Position/Speed, Currents and DC-link Voltage) Fault Detection and Diagnosis in PMSM drive, 2014. (https://hal.science/hal-01265267v1)
Cherif Larouci, Kamal Ejjabraoui, Pierre Lefranc, Claude Marchand. Impact of the control constraint on a buck converter design based on multi-objective optimization procedure, 2012-09-01. (https://hal.science/hal-04564493v1)
Kamal Ejjabraoui, Cherif Larouci, Pierre Lefranc, Claude Marchand. Presizing Methodology of DC-DC Converters Using Optimization Under Multiphysic Constraints : Application to a Buck Converter, 2012-07. (https://centralesupelec.hal.science/hal-00633689v1)
Sengprasong Phrakonkham, Ghislain Remy, Demba Diallo, Claude Marchand. Pico vs Micro Hydro based Optimized Sizing of a Centralized AC Coupled Hybrid Source for villages in Laos, 2012-03. (https://centralesupelec.hal.science/hal-00712481v1)
A. de Bernardinis, E. Frappé, O. Béthoux, C. Marchand, G. Coquery. Multi-port power converter for segmented PEM fuel cell in transport application, 2012. (https://hal.science/hal-01283668v1)
Chérif Larouci, Kamal Ejjabraoui, Pierre Lefranc, Claude Marchand. Placement Optimization of Power Components in Static Power Converters under Spatial and Thermal Constraints, 2012. (https://centralesupelec.hal.science/hal-00779510v1)
Toufik Azib, Olivier Bethoux, Ghislain Remy, Claude Marchand. Saturation Management of a Controlled Fuel-Cell/Ultracapacitor Hybrid Vehicle, 2011-12. (https://centralesupelec.hal.science/hal-00712480v1)
Xavier Jannot, Jean-Claude Vannier, Claude Marchand, M. Gabsi, J. Saint-Michel, Daniel Sadarnac. Multiphysic Modeling of a High-Speed Interior Permanent-Magnet Synchronous Machine for a Multiobjective Optimal Design, 2011-06. (https://centralesupelec.hal.science/hal-00633645v1)
Reine Talj, Toufic Azib, Olivier Bethoux, Ghislain Remy, Claude Marchand, Eric Berthelot. Parameter analysis of PEM fuel cell hysteresis effects for transient load use, 2011-05. (https://hal.science/hal-00999078v1)
R. Talj, T. Azib, O. Béthoux, G. Remy, C. Marchand, E. Berthelot. Parameter analysis of PEM fuel cell hysteresis effects for transient load use, 2011-05-01. (https://hal.science/hal-00698843v1)
Foudil Dadouche, Olivier Bethoux, Marie-Estelle Gueunier-Farret, Erik Johnson, Pere Roca I Cabarrocas, C. Marchand, Jean-Paul Kleider. Geometrical optimization and electrical performance comparison of thin-film tandem structures based on pm-Si:H and µc-Si:H using computer simulation, 2011-04-01. (https://polytechnique.hal.science/hal-00642129v1)
Toufik Azib, Olivier Bethoux, Ghislain Remy, Claude Marchand, Éric Berthelot. Système hybride à pile à combustible et supercondensateur : structures, contrôle commande et gestion d'énergie, 2011-03. (https://hal.science/hal-02054693v1)
Olivier Maloberti, Guillaume Krebs, Claude Marchand, Dominique Condamin, Luc Kobylanski, Edouard Bomme. Modélisation électromagnétique et thermique d'un moteur à flux axial et à aimants permanents, 2011-02. (https://centralesupelec.hal.science/hal-00712478v1)
Hala Hannoun, Mickaël Hilairet, Claude Marchand. Experimental Validation of a Switched Reluctance Machine Operating in Continuous-Conduction Mode, 2011. (https://centralesupelec.hal.science/hal-00712483v1)
Hala Hannoun, Mickaël Hilairet, Claude Marchand. High performance current control of a switched reluctance machine based on a gain-scheduling PI controller, 2011. (https://centralesupelec.hal.science/hal-00712484v1)
Toufik Azib, Olivier Bethoux, Ghislain Remy, Claude Marchand, Éric Berthelot. An Innovative Control Strategy of a Single Converter for Hybrid Fuel Cell/Supercapacitor Power Source, 2010-12. (https://hal.science/hal-02054691v1)
A. Ospina, L. Santandrea, Y. Le Bihan, C. Marchand. Modeling of thin structures in eddy current testing with shell elements, 2010-10-21. (https://hal.science/hal-00634365v1)
Sengprasong Phrakonkham, Jean-Yves Lechenadec, Demba Diallo, Ghislain Remy, Claude Marchand. Reviews on Micro-Grid Configuration and Dedicated Hybrid System Optimization Software Tools: Application to Laos, 2010-07. (https://centralesupelec.hal.science/hal-00555694v1)
Alejandro Ospina Vargas, Laurent Santandréa, Yann Le Bihan, Claude Marchand. Modeling of thin structures in eddy current testing with shell elements, 2010. (https://centralesupelec.hal.science/hal-00555697v1)
X. Ojeda, H. Hannoun, X. Mininger, M. Hilairet, M. Gabsi, C. Marchand, M. Lécrivain. Switched reluctance machine vibration reduction using a vectorial piezoelectric actuator control, 2009-06-12. (https://hal.science/hal-00491504v1)
Alejandro Ospina Vargas, Laurent Santandréa, Yann Le Bihan, Claude Marchand. Electromagnetic Field Computation in Magnetic and Conductive Thin sheets, 2009-06. (https://centralesupelec.hal.science/hal-00447227v1)
Yahya Choua, Laurent Santandréa, Yann Le Bihan, Claude Marchand. Study of the Degrees of Freedom Management of Dual Formulations for the Modelling of Thin Cracks in Eddy Current Testing, 2009-06. (https://centralesupelec.hal.science/hal-00447220v1)
Cyril Ravat, Yann Le Bihan, Pierre-Yves Joubert, Claude Marchand. Non-destructive evaluation of small defects using an eddy current microcoil sensor array, 2009-06. (https://centralesupelec.hal.science/hal-00447228v1)
Mohamed Bensetti, Yahya Choua, Laurent Santandréa, Yann Le Bihan, Claude Marchand. Adaptive mesh refinement and probe signal calculation in eddy current NDT by complementary formulations, 2008-06. (https://centralesupelec.hal.science/hal-00352639v1)
Claude Delpha, Demba Diallo, Mohamed Benbouzid, Claude Marchand. Application of classification methods in fault detection and diagnosis of inverter fed induction machine drive : A trend towards reliability, 2008. (https://centralesupelec.hal.science/hal-00445546v1)
Cyril Ravat, Yann Le Bihan, Pierre-Yves Joubert, Claude Marchand. Comparative Study of Coil Arrangements for the EC Testing of Small Surface Breaking Defects, 2008. (https://centralesupelec.hal.science/hal-00354401v1)
Laurent Santandrea, Yann Le Bihan, Claude Marchand. A finite element modelling tool of a buried system for glass furnace wall characterization, 2007-06-28. (https://hal.science/hal-01547605v1)
Mohamed Bensetti, Yann Le Bihan, Claude Marchand. Development of an hybrid 3D FEM for the modeling of micro-coil sensors and actuators, 2006-05. (https://hal.science/hal-03219744v1)
Yann Le Bihan, J. Pavo, Mohamed Bensetti, Claude Marchand. Computational environment for the fast calculation of ECT probe signal by field decomposition, 2006-03-20. (https://hal.science/hal-03219794v1)
Mohamed Bensetti, Yann Le Bihan, Claude Marchand. Non-destructive evaluation of layered planar media using MLP and RBF neural network, 2006. (https://hal.science/hal-03680511v1)
M. Bensetti, Y. Le Bihan, C. Marchand, C.-M. Tassetti, Gaelle Bazin Lissorgues, E.D. Gergam, J.-P. Gilles. A hybrid finite-element method for the modeling of microcoils, 2005-05. (https://hal.science/hal-02434700v1)
Mohamed Bensetti, Yann Le Bihan, Claude Marchand, Jozsef Pavo. Deposit characterization by eddy current nondestructive evaluation, 2004-04-24. (https://hal.science/hal-03219973v1)
F. Colamartino, C. Marchand, Adel Razek. Torque ripple minimization in permanent magnet synchronous servodrive, 1999. (https://hal.science/hal-04319095v1)
C. Marchand, Adel Razek. Optimal torque operation of digitally controlled permanent magnet synchronous motor drives, 1993. (https://hal.science/hal-04319120v1)
Communication dans un congrès - 132 documents
Célia Masternak, Cécile Begassat-Piquet, Clémence Lévêque, Simon Meunier, Vincent Reinbold, Dirk Saelens, Claude Marchand. Clustering methods to select representative days for heat pumps optimal operation accounting for electricity grid constraints, 2023-10-23. (https://hal.science/hal-04549246v1)
Rémi Jardot, Guillaume Krebs, Anas Lahlou, Francis Roy, Olivier de La Barrière, Claude Marchand. Étude et Dimensionnement d'une Machine Synchrone pour un Convertisseur Distribué dans la Batterie, 2023-07-05. (https://hal.science/hal-04168402v1)
Claude Marchand, Mehdi Djami, Maya Hage-Hassan, Guillaume Krebs, Philippe Dessante, Lamya Belhaj. Metamodel-Based Electric Vehicle Powertrain Optimization : A Drive Cycle Approach, 2023-05-15. (https://hal.science/hal-04230379v1)
A. Sahnoune, Maya Hage-Hassan, Guillaume Krebs, Claude Marchand, Julien Guihaire, Olaf Mercier. Design and analysis of a Circulatory Assistance Benchmark Actuator for an Artificial Lung, 2022-09-05. (https://hal.science/hal-04230364v1)
M. Djami, Maya Hage-Hassan, Claude Marchand, Guillaume Krebs, Philippe Dessante, L.A. Belhaj. Kriging Metamodel for Electric Machines: A Drive Cycle Approach, 2022-09-05. (https://hal.science/hal-04230377v1)
Abdelhakim Sahnoune, Maya Hage-Hassan, G Krebs, Philippe Dessante, Claude Marchand, Olaf Mercier, Julien Guihaire. Conception d'un actionneur d'assistance circulatoire, 2021-07-06. (https://hal.science/hal-03388344v2)
Christine Abdel Nour, Anne Migan-Dubois, Jordi Badosa, Vincent Bourdin, Claude Marchand, Tilda Karkour Akiki. Installation PV équipée de réflecteurs plans : Quelles sont les conséquences d’un éclairement non uniforme sur la production PV, 2020-12. (https://hal.science/hal-03312383v1)
Judith Cherni, Arouna Darga, Philippe Dessante, Matthias Heinrich, Peter Kitanidis, Claude Marchand, Dale Manning, Simon Meunier, B Multon, Loic Queval, Thomas Vezin, Vido Lionel. Turning Sun into Water - Present status and perspectives, 2020-11-22. (https://hal.science/hal-03133905v1)
Hongqin Xie, Guillaume Krebs, Maya Hage Hassan, Man Zhang, Claude Marchand, Zhuoxiang Ren. Linear interpolation-based method with branch connection constraints for movement in reluctance network model, 2019-07-15. (https://hal.sorbonne-universite.fr/hal-03169364v1)
Simon Meunier, Loic Queval, Matthias Heinrich, Elvire A de La Fresnaye, Judith Cherni, Lionel Vido, Arouna Darga, Philippe Dessante, Bernard Multon, Peter Kitanidis, Claude Marchand. Effect of irradiance data on the optimal sizing of photovoltaic water pumping systems, 2019-06-16. (https://hal.science/hal-02471967v1)
Simon Meunier, Matthias Heinrich, Loic Queval, Judith A. Cherni, Vido Lionel, Arouna Darga, Philippe Dessante, Bernard Multon, Peter Kitanidis, Claude Marchand. Conception optimale des systèmes photovoltaïques de pompage d’eau en sites isolés avec prise en compte des aspects socio-économiques, 2019-06-11. (https://centralesupelec.hal.science/hal-03313728v1)
Simon Meunier, Loic Queval, Arouna Darga, Philippe Dessante, Claude Marchand, Matthias Heinrich, Judith Cherni, Elvire de La Fresnaye, Lionel Vido, Bernard Multon, Peter Kitanidis. Modelling and Optimal Sizing of Photovoltaic Water Pumping Systems – Sensitivity Analysis, 2019-05-08. (https://centralesupelec.hal.science/hal-03313742v1)
Christine Abdel Nour, Anne Migan-Dubois, Jordi Badosa, Vincent Bourdin, Claude Marchand, Tilda Karkour Akiki. Estimation de l’irradiance arrivant sur une installation PV équipée de réflecteurs plans, 2018-12-04. (https://hal.science/hal-01943088v1)
Hongqin Xie, Guillaume Krebs, Maya Hage-Hassan, Claude Marchand, Zhuoxiang Ren. An Improved Finite Reluctance Approach based on Complementary Distributed Magneto-motive Forces, 2018-10-28. (https://hal.sorbonne-universite.fr/hal-01928646v1)
Simon Meunier, Loic Queval, Arouna Darga, Philippe Dessante, Claude Marchand, Matthias Heinrich, Judith Cherni, Vido Lionel, Bernard Multon. Influence of the temporal resolution of the water consumption profile on photovoltaic water pumping systems modelling and sizing, 2018-10-14. (https://hal.science/hal-01949806v1)
D.M. Nguyen, I. Bahri, G. Krebs, Claude Marchand. Performance of the Intermittent Control for Switched Reluctance Machine on Driving Cycle, 2018-09-03. (https://centralesupelec.hal.science/hal-02394005v1)
Duy-Minh Nguyen, Imen Bahri, Guillaume Krebs, Claude Marchand. Impact de la commande intermittente sur la pulsation du couple d'une machine à réluctance variable pour véhicule électrique, 2018-07-03. (https://hal.science/hal-02981873v1)
Simon Meunier, Matthias Heinrich, Judith A. Cherni, Loïc Quéval, Philippe Dessante, Vido Lionel, Arouna Darga, Claude Marchand, Bernard Multon. Modélisation et validation expérimentale d'un système de pompage photovoltaïque dans une communauté rurale isolée du Burkina Faso, 2018-07-03. (https://hal.science/hal-01949940v2)
Qi Jiang, Olivier Béthoux, Florence Ossart, Éric Berthelot, Claude Marchand. A-ECMS and SDP Energy Management Algorithms applied to a Fuel Cell Electric Scooter, 2017-12-11. (https://hal.science/hal-01693651v1)
Duy-Minh Nguyen, Imen Bahri, Guillaume Krebs, Claude Marchand. Impact of the intermittent control on the torque pulsation of a switched reluctance machine, 2017-12-11. (https://hal.science/hal-01707811v1)
Duy-Minh Nguyen, Imen Bahri, Guillaume Krebs, Claude Marchand. Impact of the intermittent control on the vibration behavior of a switched reluctance machine, 2017-11-22. (https://hal.science/hal-01707815v1)
Qi Jiang, Olivier Béthoux, Florence Ossart, Éric Berthelot, Claude Marchand. Experimental validation of off-line energy management strategies applied to a hybrid FC/SC system, 2017-07-04. (https://hal.science/hal-01693644v1)
Duy-Minh Nguyen, Imen Bahri, Guillaume Krebs, Claude Marchand. Intermittent control for efficiency gain of a switched reluctance machine, 2017-05-21. (https://hal.science/hal-01707796v1)
M'Hamed Belhadi, Guillaume Krebs, Claude Marchand, Hala Hannoun, Xavier Mininger. Comparaison de modifications géométriques d'une MRV pour la traction électrique, 2016-06-07. (https://hal.science/hal-01361660v1)
Moustafa Al Eit, Frédéric Bouillault, Guillaume Krebs, Claude Marchand. Comparison between Analytic Calculation and Finite Element Modeling in the Study of Winding Geometry Effect on Copper Losses, 2016-06-07. (https://hal.science/hal-01361663v1)
Abla Dahia, Frédéric Dubas, M'Hamed Belhadi, Guillaume Krebs, Laurent Daniel, Claude Marchand. Couplage Magnéto-Mécanique pour le Dimensionnement de Machines Électriques, 2016-06-07. (https://hal.science/hal-01361573v1)
Qi Jiang, Florence Ossart, Claude Marchand. Real-time HEV energy management strategies, 2016-06-07. (https://hal.science/hal-01361674v1)
Imen Bahri, Maamri Hana, Emmanuel Godoy, Claude Marchand, Eric Berthelot. Comparison of two control strategies regarding vibration criterion for switched reluctance machine, 2016-04-18. (https://centralesupelec.hal.science/hal-01337029v1)
Moustafa Al Eit, Frédéric Bouillault, Claude Marchand, Guillaume Krebs. Model-Order Reduction of Electrical Machines by Means of POD and DEI methods for Copper Loss Calculation, 2016-04-12. (https://centralesupelec.hal.science/hal-01336191v1)
Moustafa Al Eit, Frédéric Bouillault, Claude Marchand, Guillaume Krebs. The Boundary Condition Effects on Reduced Finite Element Models for Eddy Currents Loss Calculation, 2016-04-12. (https://centralesupelec.hal.science/hal-01336207v1)
Chao Liu, Guillaume Krebs, Philippe Dessante, Claude Marchand, Jean-Claude Vannier. Modeling and optimization of an induction machine for the application of electrical vehicle, 2015-09-10. (https://centralesupelec.hal.science/hal-01282069v1)
Moustafa Al Eit, Frédéric Bouillault, Claude Marchand, Guillaume Krebs, Laurent Santandréa. 2D Modeling of Litz Wire : Reduced Model and its Application for Switched Reluctance Machine, 2015-06-28. (https://centralesupelec.hal.science/hal-01531331v1)
Moustafa Al Eit, Laurent Santandrea, Frédéric Bouillault, Claude Marchand, Guillaume Krebs. Calcul des Pertes Cuivre dans les Conducteurs Multi- filamentaires et Application aux Bobinages des Machines à Réluctance Variable à Double Saillance, 2015-06-03. (https://centralesupelec.hal.science/hal-01531351v1)
Chao Liu, Guillaume Krebs, Philippe Dessante, Claude Marchand, Jean-Claude Vannier. Optimization and performance comparisons of Induction and Synchronous Reluctance Machines considering the driving cycle of an electrical vehicle, 2015-05-10. (https://centralesupelec.hal.science/hal-01282087v1)
Boris Desjouis, Ghislain Remy, Florence Ossart, Claude Marchand, Jean Bigeon, Etienne Sourdille. A new generic problem formulation dedicated to electrified railway systems, 2015-03-03. (https://hal.science/hal-01241090v1)
M'Hamed Belhadi, Guillaume Krebs, Claude Marchand, Hala Hannoun, Xavier Mininger. Evaluation of a switched reluctance motor with magnetic slot wedges, 2014-09-02. (https://hal.science/hal-01244966v1)
Pierre Estival, Guillaume Krebs, Claude Marchand, Rabia Sehab, Bertrand Barbedette. Pré-dimensionnement d'une machine synchrone à aimants permanents sous contrainte de masse, 2014-07-08. (https://hal.science/hal-04588525v1)
Francis Roy, Florence Ossart, Claude Marchand. Gestion énergétique optimale au service de la conception de chaînes de traction hybrides, 2014-07-08. (https://hal.science/hal-01065412v1)
Chao Liu, Guillaume Krebs, Philippe Dessante, Claude Marchand, Jean-Claude Vannier. Modélisation comportementale non linéaire de moteurs asynchrones à cage pour le pré-dimensionnement, 2014-07-08. (https://hal.science/hal-01065209v1)
Sidath Diao, Demba Diallo, Zaatar Makni, Claude Marchand. Diagnostic des capteurs pour la commande des entrainements électriques, 2014-07-08. (https://hal.science/hal-01065242v1)
Pierre Estival, Guillaume Krebs, Claude Marchand, Rabia Sehab, Bertrand Barbedette. Pré-dimensionnement d'une machine synchrone à aimants permanents validé par un modèle dynamique, 2014-07-08. (https://hal.science/hal-01065252v1)
M'Hamed Belhadi, Guillaume Krebs, Claude Marchand, Hala Hannoun, Mininger Xavier. Reduction des ondulations de couple et des efforts radiaux dans une machine a reluctance variable, 2014-07-08. (https://hal.science/hal-01065260v1)
Mahraz Bendali, Chérif Larouci, Toufik Azib, Claude Marchand, Gerard Coquery. Intégration de la fiabilité dans la conception sous contraintes multi-physiques des convertisseurs statiques multicellulaires, 2014-07-08. (https://hal.science/hal-01065238v1)
Xavier Rain, Guillaume Krebs, Claude Marchand. Modélisation et caractérisation d'une machine à réluctance variable à double saillance avec bobinage d'excitation, 2014-07-08. (https://hal.science/hal-01065204v1)
Mahraz Bendali, Cherf Larouci, Toufik Azib, Claude Marchand, Gerard Coquery. Reliability assesment in the design of interleaved converters under multi-physical constraints, 2014-06-01. (https://hal.science/hal-04588499v1)
M'Hamed Belhadi, Guillaume Krebs, Claude Marchand, Hala Hannoun, Xavier Mininger. Evaluation and comparison of the axial SRM and radial SRM in EV, 2014-05-25. (https://centralesupelec.hal.science/hal-01099221v1)
Gérard Coquery, Mohamed Omar Younsi, Claude Marchand, Toufik Azib, Cherif Larouci, Mahraz Bendali. Current-sharing control technique of interleaved buck converter for automotive application, 2014-04-08. (https://hal.science/hal-04588745v1)
Mahraz Bendali, Claude Marchand, Toufik Azib, Gérard Coquery, Cherif Larouci. Design with Optimization of an Interleaved Buck Converter for Automotive Application; Effect of the EMC Constraint, 2014-04-08. (https://hal.science/hal-04588724v1)
Maya Hage Hassan, Guillaume Krebs, Ghislain Remy, Claude Marchand. Multi-objective Optimization of an Axial-flux PM Actuator with Space Mapping Technique, 2014-03-31. (https://centralesupelec.hal.science/hal-01103669v1)
Sidath Diao, Claude Marchand, Zaatar Makni, Demba Diallo, Jean-Francois Bisson. Current Sensor Fault Diagnosis in the Stationary Frame for PMSM Drive in Automotive Systems, 2014-03-25. (https://centralesupelec.hal.science/hal-01093465v1)
Sidath Diao, Demba Diallo, Zaatar Makni, Claude Marchand, Jean-Francois Bisson. Sensor Fault Diagnosis for Improving the Availability of Electrical Drives, 2013-11-10. (https://centralesupelec.hal.science/hal-00932687v1)
Francis Roy, Claude Gazo, Florence Ossart, Claude Marchand. TRIZ methodology adapted to hybrid powertrains, 2013-09-23. (https://hal.science/hal-01205890v1)
Maya Hage-Hassan, Guillaume Krebs, Ghislain Remy, Claude Marchand. Embedded multilevel optimization for nonlinear time-stepping mesh-based reluctance network, 2013-07-01. (https://hal.science/hal-01677537v1)
Mahraz Bendali, Cherif Larouci, Toufik Azib, Claude Marchand, Gérard Coquery. Design methodology with optimization of an interleaved buck converter for automotive application, 2013-07-01. (https://hal.science/hal-04588859v1)
Mahraz Bendali, Amar Ramdane-Cherif, Toufik Azib, Claude Marchand, Gérard Coquery. Design of Interleaved Power Converters under Volume, Efficiency and Thermal Constraints, 2013-05-14. (https://hal.science/hal-04588843v1)
Sidath Diao, Demba Diallo, Zaatar Makni, Claude Marchand, Jean-Francois Bisson. A differential algebraic approach for position/speed estimation in PMSM, 2013-05-12. (https://centralesupelec.hal.science/hal-00932677v1)
Maya Hage-Hassan, Guillaume Krebs, Claude Marchand. A simplified time stepping nonlinear mesh based reluctance network for machine design, 2013-05-12. (https://centralesupelec.hal.science/hal-00932659v1)
Yann Le Bihan, Claude Marchand, Joszef Pavo. Quantitative Evaluation of Small Anomalies in Non-Destructive Testing using Partial Least Square Regression, 2013-04. (https://centralesupelec.hal.science/hal-00932700v1)
Mohammad Belhadi, Ali Kolli, Guillaume Krebs, Claude Marchand. Evaluation of Torque-Speed Curve of Switched Reluctance Motor with Segmental Rotor, 2012-09-02. (https://centralesupelec.hal.science/hal-00779584v1)
Ali Kolli, Guillaume Krebs, Xavier Mininger, Claude Marchand. Impact of command parameters on efficiency, torque ripple and vibrations for switched reluctance motor, 2012-09-02. (https://centralesupelec.hal.science/hal-00779583v1)
Mourad Chabchoub, Ibrahim Ben Salah, Guillaume Krebs, Rafik Neji, Claude Marchand. PMSM cogging torque reduction: Comparison between different shapes of magnet, 2012-03-26. (https://centralesupelec.hal.science/hal-00779586v1)
Abdoulaye Kébé, Sengprasong Phrakonkham, Ghislain Remy, Demba Diallo, Claude Marchand. Optimal Design of a renewable energy power plant for an isolated site in Senegal, 2012-03-26. (https://centralesupelec.hal.science/hal-00779593v1)
Alexandre de Bernardinis, Emmanuel Frappé, Olivier Bethoux, Claude Marchand, Gérard Coquery. Electrical architecture for high power segmented PEM Fuel Cell in vehicle application, 2012-03-26. (https://centralesupelec.hal.science/hal-00932671v1)
Ghislain Remy, Mojtaba Kamali Nejad, Toufik Azib, Olivier Bethoux, Claude Marchand. Structuration de modèles pour l'optimisation parallélisée sous Matlab, 2011-05. (https://centralesupelec.hal.science/hal-00712515v1)
Guillaume Krebs, Yann Le Bihan, Claude Marchand, Francisco Alves. Prise en compte des milieux fins dans le CND CF grâce à la méthode overlapping, 2011-05. (https://centralesupelec.hal.science/hal-00712509v1)
Mohamed Khanchoul, Guillaume Krebs, Claude Marchand, Francisco Alves, Aurélien Battelier, Michel Roze. Design and Study of a Permanent Magnet Synchronous Motor for an Electric Compressor, 2011-03. (https://centralesupelec.hal.science/hal-00712512v1)
Sengprasong Phrakonkham, Abdoulaye Kébé, Ghislain Remy, Demba Diallo, Claude Marchand. Optimized Sizing of AC Coupled Hybrid Sources for Isolated Villages, 2011. (https://centralesupelec.hal.science/hal-00712530v1)
Xavier Jannot, Jean-Claude Vannier, Afef Kedous-Lebouc, Claude Marchand, Mohamed Gabsi, Jacques Saint-Michel. Analytical Computation of Stator Iron Losses in Interior Permanent-Magnet Synchronous Machine, 2010-09-06. (https://centralesupelec.hal.science/hal-00520475v1)
M. Kamali-Nejad, T. Azib, G. Remy, O. Béthoux, Claude Marchand. Optimization of a power electronic structure for hybrid Fuel Cell/Ultracapacitors vehicle, 2010-09-01. (https://hal.science/hal-02054624v1)
Emmanuel Frappé, Alexandre de Bernardinis, Olivier Bethoux, Claude Marchand, Gérard Coquery. Fault detection and identification using simple and non-intrusive on-line monitoring techniques for PEM fuel cell, 2010-07-04. (https://hal.science/hal-02054622v1)
Xavier Jannot, Jean-Claude Vannier, Mohamed Gabsi, Claude Marchand, Jacques Saint-Michel. Steady State Performance Computation of a Synchronous Machine using Harmonic, 2010-07-04. (https://centralesupelec.hal.science/hal-00516051v1)
Emmanuel Frappé, Alexandre de Bernardinis, Olivier Bethoux, Claude Marchand, Gérard Coquery. Action palliative par le convertisseur statique en cas de défaillance d'un générateur PAC modulaire de puissance, 2010-06-30. (https://hal.science/hal-00615205v1)
K. Ejjabraoui, C. Larouci, Pierre Lefranc, Claude Marchand. Approche multi-niveaux de pré-dimensionnement de convertisseurs statiques par optimisation sous contraintes multi-physiques, 2010-06-30. (https://centralesupelec.hal.science/hal-00492947v1)
K. Ejjabraoui, C. Larouci, Pierre Lefranc, Claude Marchand. Design by optimization of a Boost converter. Integration of the control aspect, 2010-05-04. (https://centralesupelec.hal.science/hal-00492924v1)
Yann Le Bihan, Claude Marchand, Joszef Pavo, Guillaume Krebs. Partial Least Square Regression for Quantitative Evaluation of Small Anomalies in Non-Destructive Testing, 2010-05. (https://centralesupelec.hal.science/hal-00555707v1)
K. Ejjabraoui, C. Larouci, Pierre Lefranc, Claude Marchand. Pre-sizing of DC-DC converters by optimizationunder constraints. Influence of the control constraint on the optimization results, 2010-03-14. (https://centralesupelec.hal.science/hal-00492904v1)
Alejandro Ospina Vargas, Laurent Santandréa, Yann Le Bihan, Claude Marchand. Planar Coil Model using Shell Elements Applied to an Eddy-Current Non-Destructive Testing, 2009-12. (https://centralesupelec.hal.science/hal-00447249v1)
K. Ejjabraoui, C. Larouci, Pierre Lefranc, Claude Marchand. A new pre-sizing approach of DC-DC converters, application to a boost converter for the automotive domain, 2009-11-03. (https://centralesupelec.hal.science/hal-00438580v1)
Kamal Ejjabraoui, Chérif Larouci, Pierre Lefranc, Claude Marchand. A new pre-sizing approach of DC-DC converters application to a Boost converter for the automotive domain, 2009-11. (https://centralesupelec.hal.science/hal-00447247v1)
Laurent Santandréa, Yahya Choua, Alejandro Ospina Vargas, Yann Le Bihan, Claude Marchand. Analyse of different programming solutions adapted to block matrix type in electromagnetic modelling, 2009-11. (https://centralesupelec.hal.science/hal-00447267v1)
Mickaël Hilairet, Hala Hannoun, Claude Marchand. Design of an optimized SRM control architecture based on a hardware/software partitioning, 2009-11. (https://centralesupelec.hal.science/hal-00447256v1)
Toufik Azib, Olivier Bethoux, Claude Marchand, Eric Berthelot. Supercapacitors for Power Assistance in Hybrid Power Source with Fuel Cell, 2009-11. (https://centralesupelec.hal.science/hal-00447272v1)
Xavier Jannot, Jean-Claude Vannier, Claude Marchand, Mohamed Gabsi, Jacques Saint-Michel, Daniel Sadarnac. Influence des convertisseurs électroniques sur le dimensionnement optimal de machines hautes vitesses, 2009-09-24. (https://centralesupelec.hal.science/hal-00420517v1)
Xavier Jannot, Jean-Claude Vannier, Claude Marchand, Mohamed Gabsi, J. Saint-Michel, Daniel Sadarnac. Analytical computation of IPMSM air gap magnetic flux density and Electrical parameters considering space harmonics, 2009-09-10. (https://centralesupelec.hal.science/hal-00421680v1)
Toufik Azib, Olivier Bethoux, Claude Marchand, Eric Berthelot, Ghislain Remy. Comparaison d'architectures d'hybridation d'une pile à combustible avec des supercondensateurs, 2009-09. (https://centralesupelec.hal.science/hal-00447270v1)
Olivier Maloberti, Guillaume Krebs, Claude Marchand, Dominique Condamin, Luc Kobylanski, Edouard Bomme. Modélisation multiphysique d'un moteur synchrone à flux axial et à aimants permanents, 2009-09. (https://centralesupelec.hal.science/hal-00447253v1)
Hala Hannoun, Mickaël Hilairet, Claude Marchand. Mise en oeuvre de la conduction continue pour la commande de la machine à réluctance variable, 2009-09. (https://centralesupelec.hal.science/hal-00447264v1)
Toufik Azib, Olivier Bethoux, Claude Marchand, Ghislain Remy. Structure and Control Strategy for a Parallel Hybrid Fuel Cell/Supercapacitors Power Source, 2009-09. (https://centralesupelec.hal.science/hal-00447269v1)
Foudil Dadouche, Olivier Bethoux, Eric Labouré, E.V. Johnson, Pere Roca I Cabarrocas, Claude Marchand, Jean-Paul Kleider. A system study on silicon thin-film pm-Si:H/µc-Si:H tandem cell structure, 2009-09. (https://centralesupelec.hal.science/hal-00446011v1)
Sengprasong Phrakhonkham, Jean-Yves Lechenadec, Demba Diallo, Claude Marchand. Optimisation Software Tool Review and the Need of Alternative Means for Handling the Problems of Excess Energy and Mini-Grid Configuration: A Case Study from Laos, 2009-09. (https://centralesupelec.hal.science/hal-00447266v1)
Xavier Jannot, Jean-Claude Vannier, J. Saint-Michel, Mohamed Gabsi, Claude Marchand, Daniel Sadarnac. An Analytical Model for Interior Permanent-Magnet Synchronous Machine with Circumferential Magnetization Design, 2009-07-01. (https://centralesupelec.hal.science/hal-00421645v1)
Ghislain Remy, Kamal Ejjabraoui, Chérif Larouci, H. Melhem, F. Mhenni, R. Sehab, Pierre Lefranc, Bertrand Barbedette, S.A. Raka, Christophe Combastel, S. Cannou, F. Cardon, Philippe Cuvelier, Claude Marchand, Denis Barbier. Modeling guidelines and tools comparison for electromechanical system design in automotive applications - Application to a motorized hatchback, 2009-06. (https://centralesupelec.hal.science/hal-00447245v1)
Kamal Ejjabraoui, Cherif Larouci, Pierre Lefranc, Claude Marchand. A pre-sizing approach of DC-DC converters, application to design a Buck converter for the automotive domain, 2009-05-17. (https://centralesupelec.hal.science/hal-00420346v1)
Kamal Ejjabraoui, Cherif Larouci, Pierre Lefranc, Claude Marchand. Pre-sizing approach of DC-DC Buck converters for the automotive domain, 2009-05-12. (https://centralesupelec.hal.science/hal-00420323v1)
Foudil Dadouche, Olivier Bethoux, Marie-Estelle Farret-Gueunier, E.V. Johnson, Pere Roca I Cabarrocas, Claude Marchand, Jean-Paul Kleider. Comparative study of thin-film silicon cell tandem structures pm-Si:H/µc-Si:H in system association prospect, 2009. (https://centralesupelec.hal.science/hal-00446008v1)
Frédéric Wurtz, Laurent Krähenbühl, Claude Marchand, Christophe Espanet, Stéphane Brisset, Franck Pourroy, Dominique Rieu, Béatrice Fuchs. Vers de nouvelles approches pour la capitalisation des modèles pour la simulation et l'optimisation : l'expérience du projet DIMOCODE, 2008-12-08. (https://hal.science/hal-00359194v1)
Yahya Choua, Laurent Santandréa, Yann Le Bihan, Claude Marchand. Study of the DOF management of dual formulations for the modelling of thin cracks in ECT, 2008-07. (https://centralesupelec.hal.science/hal-00352908v1)
Cyril Ravat, P.-Y. Joubert, Yann Le Bihan, Claude Marchand. Non destructive evaluation of small defects using an eddy current microcoil sensor array, 2008-07. (https://centralesupelec.hal.science/hal-00353081v1)
Cyril Ravat, P.-Y. Joubert, Yann Le Bihan, Claude Marchand, M. Woytazik, E. Dufour-Gergam. Performances d'une sonde matricielle à microbobines pour la détection par courants de Foucault de défauts débouchants de faibles dimensions, 2008-05. (https://centralesupelec.hal.science/hal-00354404v1)
Yahya Choua, Laurent Santandrea, Mohamed Bensetti, Yann Le Bihan, Claude Marchand. Développement d’un outil de simulation numérique pour le CND par courants de Foucault, 2007-09. (https://hal.science/hal-03680972v1)
Mohamed Bensetti, Laurent Santandrea, Yahya Choua, Yann Le Bihan, Claude Marchand. Adaptive Mesh Refinement and Probe Signal Calculation in Eddy Current NDT by Complementary Formulations, 2007-06. (https://hal.science/hal-03680930v1)
Claude Delpha, Demba Diallo, Mohamed Benbouzid, Claude Marchand. Pattern recognition for diagnosis of inverter fed induction machine drive: a step toward reliability, 2007-05-24. (https://centralesupelec.hal.science/hal-00871162v1)
Yann Le Bihan, Jozsef Pavo, Yahya Choua, Mohamed Bensetti, Laurent Santandrea, Claude Marchand. Study on the calculation by FEM-BIM combination of the EC signal due to a crack in presence of an edge, 2007-05. (https://hal.science/hal-03680929v1)
Montacer Rekik, Mondher Besbes, Claude Marchand, Bernard Multon, Serge Loudot, Dominique Lhotellier. High Speed Range Enhancement of a Switched Reluctance Motor with Continous Mode, 2007-04-29. (https://hal.science/hal-00676127v1)
Mohamed Bensetti, Yann Le Bihan, Claude Marchand. Fine modeling of a tunable micro-inductance by a FEM based approach, 2006-05. (https://hal.science/hal-03680928v1)
Yann Le Bihan, Mohamed Bensetti, Yahya Choua, Claude Marchand, Lionel Pichon. Modélisations BF et HF de bobines gravées, 2005-11. (https://hal.science/hal-03680965v1)
Montacer Rekik, Mondher Besbes, Claude Marchand, Bernard Multon, Sege Loudot, Dominique Lhotellier. Optimisation du nombre de spires et des angles de commandes d'un moteur à réluctance à double saillance pour application de traction électrique, 2005-09-14. (https://hal.science/hal-00676116v1)
Mohamed Bensetti, Yann Le Bihan, Claude Marchand, Denis Premel. Neural networks eddy current non-destructive evaluation of a conductive plate, 2005-09. (https://hal.science/hal-03680927v1)
Yann Le Bihan, Jozsef Pavo, Mohamed Bensetti, Claude Marchand. Computational Environment for the Fast Calculation of ECT Probe Signal, 2005-05. (https://hal.science/hal-03680926v1)
Mohamed Bensetti, Yann Le Bihan, Claude Marchand. Inversion en CND par réseaux de neurones, 2005-05. (https://hal.science/hal-03680968v1)
Mohamed Bensetti, Yann Le Bihan, Claude Marchand. Development of an hybrid 3D finite element method for the modeling of micro-coil sensors and actuators, 2004-07. (https://hal.science/hal-03680925v1)
Mohamed Bensetti, Yann Le Bihan, Claude Marchand, Charles-Marie Tassetti, Gaelle Lissorgues, Elisabeth Dufour-Gergam, Jean-Paul Gilles. An hybrid finite element method for the modeling of micro-inductors, 2004-06. (https://hal.science/hal-03680923v1)
Charles-Marie Tassetti, Mohamed Bensetti, Gaelle Lissorgues, Jean-Paul Gilles, Yann Le Bihan, Claude Marchand, N. Nicole. Design, Modeling and Measurements of Tunable MEMS inductors, 2004-05. (https://hal.science/hal-03680921v1)
Mohamed Bensetti, Yann Le Bihan, Claude Marchand, Elisabeth Dufour-Gergam, Jean-Paul Gilles, Charles-Marie Tassetti, Gaelle Lissorgues. 3D Finite Element Modelling of micro-inductors, 2003-07. (https://hal.science/hal-03680917v1)
Mohamed Bensetti, Yann Le Bihan, Claude Marchand, Jozsef Pavo. Deposit characterization by eddy current nondestructive evaluation, 2003-05. (https://hal.science/hal-03680915v1)
Mohamed Bensetti, Yann Le Bihan, Claude Marchand, Denis Prémel. Non-destructive evaluation of layered planar media using MLP and RBF neural networks, 2002-06. (https://hal.science/hal-03680911v1)
F. Colamartino, Claude Marchand, Adel Razek. Considerations of non-sinusoidal field distribution in a permanent magnet synchronous motor control, 1994-10-26. (https://hal.science/hal-04319377v1)
POSTER - 11 documents
Christine Abdel Nour, Anne Migan-Dubois, Jordi Badosa, Vincent Bourdin, Claude Marchand, Tilda Akiki. Evaluation of the plane of array irradiance for a photovoltaic installation equipped with flat reflectors in different geographical locations, 2019-06. (https://hal.science/hal-03312267v1)
Christine Abdel Nour, Anne Migan-Dubois, Jordi Badosa, Vincent Bourdin, Claude Marchand, Tilda Akiki. Photovoltaic system equipped with flat reflectors: New MPPT model in case of non-uniform illumination on PV modules, 2018-09-28. (https://hal.science/hal-01803053v1)
Christine Abdel Nour, Anne Migan-Dubois, Jordi Badosa, Vincent Bourdin, Claude Marchand, Tilda Karkour Akiki. Utilisation des mesures Météorologiques du SIRTA dans le but de modéliser la production électrique d’une installation photovoltaïque équipée de réflecteurs plans, 2018-06-15. (https://hal.science/hal-01943039v1)
Christine Abdel Nour, Anne Migan-Dubois, Jordi Badosa, Vincent Bourdin, Claude Marchand, Tilda Akiki. Etude de l’effet du sur-éclairement non uniforme sur les performances d’une installation photovoltaïque équipée de réflecteurs plans, 2017-12. (https://hal.science/hal-01630091v1)
Moustafa Al Eit, Patrick Dular, Frédéric Bouillault, Claude Marchand, Guillaume Krebs. 2D Finite Element Model Reduction for Copper LossesCalculation in Switched Reluctance Machines, 2016-11-13. (https://centralesupelec.hal.science/hal-01405711v1)
Chao Liu, Guillaume Krebs, Philippe Dessante, Claude Marchand, Jean-Claude Vannier. Modélisation comportementale non-linéaire de moteurs asynchrones à cage pour le pré-dimensionnement, 2014-07-08. (https://centralesupelec.hal.science/hal-01104512v1)
Xavier Rain, Guillaume Krebs, Claude Marchand. Modélisation et caractérisation d'une machine à réluctance variable à double saillance avec bobinage d'excitation, 2014-07-08. (https://centralesupelec.hal.science/hal-01104517v1)
Pierre Estival, Guillaume Krebs, Claude Marchand, Rabia Sehab, Bertrand Barbedette. Pré-dimensionnement d’une machine synchrone à aimants permanents validé par un modèle dynamique, 2014-07-08. (https://centralesupelec.hal.science/hal-01104515v1)
Pierre Estival, Guillaume Krebs, Claude Marchand, Rabia Sehab, Bertrand Barbedette. Pre-Sizing of Permanent Magnet Synchronous Machine under Mass Constraints, 2014-04-02. (https://centralesupelec.hal.science/hal-01104509v1)
Laurent Santandrea, Yayha Choua, Yann Le Bihan, Claude Marchand. Using Mortar Element Method for Eddy Current Testing Finite Element Computations, 2007-06-24. (https://hal.science/hal-01547585v1)
Laurent Santandrea, Yayha Choua, Yann Le Bihan, Claude Marchand. Adaptive mesh refinement for eddy current testing finite element computations, 2006-04-04. (https://hal.science/hal-01547509v1)
Chapitre d'ouvrage - 1 document
Cherif Larouci, Kamal Ejjabraoui, Pierre Lefranc, Claude Marchand, Bertrand Barbedette, Philippe Cuvelier. Modelling and Design of a Mechatronic Actuator Chain Application to a Motorized Tailgate, 2010-01-01. (https://hal.science/hal-04600206v1)
